| Disclaimer: The information on this page has not been checked by an independent person. Use this information at your own risk. |
A belt drive is a method of transferring rotary motion between two parallel shafts. The belts transferring torque by surface friction need to be in tension. This results in the need for adjustable shaft centres or using tensioning pulleys.
Note: More details and pictures of all belt types below are to be found at the links below table
| Belt Type | Description |
| Flat | Belt transfers torque by friction of the belt over a pulley. Needs tensioner. Traction related to angle of contact of belt on pulley. Is susceptible to slip. Belt made from leather, woven cotton, rubber, balata. |
| Vee | Better torque transfer possible compared to flat belt. Generally arranged with a number of matched vee belts to transmit power. Smooth and reliable. Made from hi-text woven textiles, polyurethane, etc. |
| Poly-Vee | Belt is flat on outside and Vee Grooved along the inside. Combines advantages of high traction of the Vee belt and the use of only one belt. |
| Timing/ Synchonous |
Belt toothed on the inside driving via grooved pulleys. This enables positive drive. Limited power capacity compared to chain and Vee belt derivatives. Does not require lubrication. Extensively used in low power applications |
| Vee Link Belts | Linked belts that can be used in place of vee belts. Advantage that the length can be adjusted and the belt can be easily installed with removing pulleys. Expensive and limited load capacity. |
Send Comments to RoyBeardmore@ic24.net
Last Updated 5/11/2001