speaker kits I drive units I crossover components I damping materials I spikes & fixings I amplifiers I active crossovers I phono kit I cables,volume control & accessories
speaker kits I drive units I crossover
components I damping materials I spikes
& fixings I amplifiers I active
crossovers I phono kit I cables,volume control &
accessories
LINSLEY HOOD DESIGNED KITS
15 Watt Single Ended Class A
This amazing amplifier gives the popular 'Valve Sound' without
the inconvenience, danger and expense of actually having to use
high spec valves! Based on a design originally devised in the
late '60s and carefully updated in 1996. The design brief was to
produce an amplifier that would perform at least as well as the
best of the Valve amps, at the time when Valves ruled, the
upgrade has done nothing to affect the delicacy and purity of
reproduction.
For the sake of clarity, you will need the following for a stereo
amp:- 2 x 4020/4025, 1 x 4050/4055, 3 x Heatsinks, 1 x
Transformer = £268.93
For a monoblock you will need :- 1 x 4020/4025, 1 x 4050/4055, 2
x Heatsinks and 1 x Transformer = £203.13. Extra to the kits you
will need phono connectors, binding posts, mains input socket and
lead, cables, on/off switch and a suitable case or case
construction.
Power Amp Module
Components including PCB (for one channel) 4020/4025 
A fully printed circuit board with extra thick copper tracks to
cope with the heavy currents (144 x 78mm). A full set of
resistors, semiconductors and capacitors along with hardware to
match our instructions. £ 45.81
Power Supply Components
including PCB 4050/4055... £ 81.44
A fully printed circuit board to the same high specification of
the amplifier PCBs (160 x 114mm).
A full set of resistors, semiconductors and capacitors along with
hardware to match our instructions.
Even though one supply will power two power amps, it is
recommended that two supplies are used for the very best
performance.
 |
 |
| 4020/4025 (mounted on heatsink) | 4050/4055 (mounted on heatsink) |
Heatsink (not as shown in
above picture)... £ 19.99
This heatsink is black anodised and undrilled to save cost,
although drilling is not a problem as only small holes are
required and drawings for the purpose are provided in the
instructions
SK57 200 AL (200 x 120 x 50mm)
Toroidal Transformer XT304... £ 35.90
Audiophile grade transformer with mounting plates and ready
terminated.
RLH12 Reprints of Articles from 1969... £ 2.75
RLH13 Reprints
of Articles from 1996... £ 2.50
CM4000
Construction Manual... £ 5.00
| Power
Amplifier PCB...£
18.90 each Power Supply PCB...£ 22.70 each |
 One Customer's Metalwork Skills & Imagination |
| Super Solder Wire (20swg) 2.2% Flux. 63% Tin content and
high quality resin flux on colophonium base for precision
soldering work. Accredited to DIN 1707. 250 g reel £ 4.99 1 kg reel £ 19.75 |
 |
| Lead Free Silver
Solder (18 or 22swg) The
ultimate solder? 96% tin 0.5% copper and 3.5% silver
content prevents leaching and the formation of brittle
joints during soldering of silver and gold plated
surfaces. 3 Metres £ 2.50 250g reel £ 20.00 |
 |
| Divide the UK prices by 1.175 to find out what you pay outside the EEC. |
Mastercard, Visa,
Amex, Delta, Switch, JCB accepted
Tel/fax *44(0)1678 520757