home page
speaker kits I drive units I crossover components I damping materials I spikes & fixings I amplifiers I active crossovers I phono kit I cables,volume control & accessories

MONACOR AMPLIFIER MODULES

The 102 & 202 Mosfet amps are not in the same ball park as the Linsley Hood designs, but a very respectable module non the less comparing favourably with amplifiers costing around £2000!

   
Discounted price for a Complete set of components for building this
Dual Mono amp, complete with binding posts and phono sockets.

75watt..(100watt Music Power)...£480.00 (408.51)
180watt.(250watt Music Power)..£552.00 (£469.79)


An example of what the amp layout would look like.
  PMA 102 PMA202
Rms. power output 8ohm 75 WRMS 180 WRMS
THD <0.15% <0.1%
Power bandwidth 15-90 000Hz 15-90 000Hz
Input Impedance 25kohm 25kohm
S/N ratio 100dB 100dB
Recommended heatsink 0.5 C/W 0.2 C/W
Dimensions 170 x 50 x 130 mm 170 x 50 x 130 mm
Transformer requirements +/- 50V 400VA plus +/- 50V 400VA plus
 
  PMA 102...£ 82.00 each (£69.79) PMA 202...£118.00 each (£100.43)
NB2000 Power supply capacitors and bridge rectifier for above amplifier modules £37.00 per set (£31.49)


400VA 50v + 50v Toroidal Transformer...£ 60.00 each (£51.06)
UC 113/SW Cabinet the same as the cabinet used for the JLH amps, but large enough to house two PMA 102 or 202, two power supplies and two transformers!
Dimensions: 446w x 120h x 310d ...£235.00 (£200.00)

IPA 50 Amplifier Modules...£38.00 each (£32.34)
A compact module which is ideal for active speakers and can run on the same +/- 15V requirements as our active modules. They have thermic overload protection and internal speaker protection against DC & AC voltages.

60VA +/- 18V Toroidal Transformer...
£22.50 (£19.15)

Rms power output 8ohm 30 WRMS
THD <0.01%
Power bandwidth 20-25 000Hz
Input Impedance 20kohm
S/N ratio >80dB
Recommended heatsink included
Dimensions 77 x 42 x 65 mm
Power supply requirements Only requires a transformer
Super Solder Wire (20swg) 2.2% Flux. 63% Tin content and high quality resin flux on colophonium base for precision soldering work. Accredited to DIN 1707.
250 g reel £ 4.99

1 kg reel £ 19.75
Lead Free Silver Solder (18 or 22swg) The ultimate solder? 96% tin 0.5% copper and 3.5% silver content prevents leaching and the formation of brittle joints during soldering of silver and gold plated surfaces.
3 Metres £ 2.50

250g reel £ 20.00


Divide the UK prices by 1.175 to find out what you pay outside the EEC.
Prices in brackets are for customers outside the EEC
 



Mastercard, Visa, Amex, Delta, Switch, JCB accepted
Tel/fax *44(0)1678 520757

Home page top of page