speaker kits I drive units I crossover components I damping materials I spikes & fixings I amplifiers I active crossovers I phono kit
speaker kits I drive units I crossover
components I damping materials I spikes
& fixings I amplifiers I active
crossovers I phono kit
NEW
ACTIVE SUBWOOFER MODULE
AT110 Active Subwoofer Module
The AT110 is a very high quality active module for use in
subwoofer construction applications ( suitable for Hi-Fi or Audio
Visual or both ). The filter provides 24db per octave active
filtering and improves on most commercial designs due to the
range of it's adjustment which is infinitely variable between 27Hz
and 270Hz. It has 3 inputs and a master volume control. Two of
the inputs are line level with their own volume pots and one is a
protected loudspeaker input. The AT110 filter offers control over
the filter Q or damping factor so that it will suit both reflex
and sealed enclosures perfectly, this is achieved by altering a
link on the PCB. The unit comes pre-assembled on a PCB as per our
other Active crossover modules and needs a +/- 15Volt power
supply and a mono amplifier.
 |
 |
Specifications Inputs 1&2 47Kohm input imp. Input 3 47Kohm input imp. With protected polarity ( i.e. no load to amplifier ) 24db filter Variable cut-off between 27Hz & 270Hz Q ( adjusted by link ) Vented = 2, Sealed = 0.9 Power LED |
Price mounted on aluminium
front plate as above...£ 99.00
Price without
frontplate...£ 85.00
Power supply
components...£ 26.00
| Divide the UK prices by 1.175 to find out what you pay outside the EEC. | 
|
Mastercard, Visa,
Amex, Delta, Switch, JCB accepted
Tel/fax *44(0)1678 520757